October 2020 - NEST Users - NEST Initiative Mail

NEST network object
by alehr 20 Nov '20

20 Nov '20

Dear NEST developer, I would like to initialize a network with neurons and connections and then run many simulations with it. It would be great if I could build the network one time and then deepcopy (or something similar) for each simulation. Is something like this possible? Thanks, Andrew Lehr

7 13

Microcircuit example, segmentation fault
by d.standage＠bham.ac.uk 17 Nov '20

17 Nov '20

Hi all - I'm running NEST on Ubuntu 18.04, installed with Conda. I can run the example networks in the user documentation, except the Microcircuit Example (having downloaded all the files). It causes a segmentation fault during the call to Simulate( ). I can provide the full error message, but in the interest of brevity - Signal: Segmentation fault (11) Signal code: Address not mapped (1) ... [ 0] /lib/x86_64-linux-gnu/libpthread.so.0(+0x128a0)[0x7feb38d5f8a0] ... Segmentation fault (core dumped) Has anyone else had this issue? I'd be grateful for any help you can provide. Best Dominic

3 3

because of the spike time stored in unordered time, so I get problem ablout the use of stdp_synapse.
by 1240288839＠qq.com 27 Oct '20

27 Oct '20

Dear all! I want to know how to use stdp_synapse correctly but I noticed there is a sentence 'Another important point is that spikes do NOT pass the Connection object in correct order of biological arrival time—they are unordered in time' about the overview of stdp_synapse; it's the last part of spike handling at website https://nest.github.io/nest-simulator/synapses_overview. So if these spike time are unordered, whether the stdp_synapse function would mimic properly.

3 4

Open NEST Developer Video Conference Monday 26 October 2020 11:30 CET (UTC+1)
by Dennis Terhorst 26 Oct '20

26 Oct '20

Dear NEST Users & Developers! I would like to invite you to our next fortnightly Open NEST Developer Video Conference today Monday 26 October, 11.30-12.30 CET (UTC+1). Please note that we changed to winter time (UTC+1). In the Project team round, a contact person of each team will give a short statement summarizing ongoing work in the team and cross-cutting points that need discussion among the teams. The remainder of the meeting we would go into a more in-depth discussion of topics that came up on the mailing list or that are suggested by the teams. Agenda Welcome Review of NEST User Mailing List Project team round In-depth discussion We will continue discussion on some of the topics of last time: * Issue #1773 <https://github.com/nest/nest-simulator/issues/1773>: wrapper around |Prepare| and |Run| (postponed from last time) * organizing HBP CodeJam#11 activities <https://www.humanbrainproject.eu/en/education/participatecollaborate/infras…> The agenda for this meeting is also available online, see https://github.com/nest/nest-simulator/wiki/2020-10-26-Open-NEST-Developer-… Looking forward to seeing you soon! best, Dennis Terhorst ------------------ Log-in information ------------------ We use a virtual conference room provided by DFN (Deutsches Forschungsnetz). You can use the web client to connect. We however encourage everyone to use a headset for better audio quality or even a proper video conferencing system (see below) or software when available. Web client * Visit https://conf.dfn.de/webapp/conference/97938800 * Enter your name and allow your browser to use camera and microphone * The conference does not need a PIN to join, just click join and you're in. In case you see a dfnconf logo and the phrase "Auf den Meetingveranstalter warten", just be patient, the meeting host needs to join first (a voice will tell you). VC system/software How to log in with a video conferencing system, depends on you VC system or software. - Using the H.323 protocol (eg Polycom): vc.dfn.net##97938800 or 194.95.240.2##97938800 - Using the SIP protocol:97938800@vc.dfn.de - By telephone: +49-30-200-97938800 For those who do not have a video conference system or suitable software, Polycom provides a pretty good free app for iOS and Android, so you can join from your tablet (Polycom RealPresence Mobile, available from AppStore/PlayStore). Note that firewalls may interfere with videoconferencing in various and sometimes confusing ways. For more technical information on logging in from various VC systems, please see http://vcc.zih.tu-dresden.de/index.php?linkid=1.1.3.4

1 0

V_th Issue in Izhikevich Neuron Model
by Allen Rabayda 17 Oct '20

17 Oct '20

Dear Nest Community, When trying to reproduce Izhikevich's Simple Neuron Model with NEST Izhikevich Neuron Model, it is spiking before reaching my V_th potential threshold setting of 30 mV, producing results inconsistent with the publication. Would anybody have insight as to why the neuron is spiking early? Did I perhaps not include a relevant NEST setting? I compared it to an explicit implementation of the ODEs, attached, for your reference of expected neuron response. Thank you for any suggestions. Best Regards, --Allen

3 4

test failures on nest master@6997cae6c on Fedora 32 with Intel Prallel Studio XE 2020 update 2
by Nilton Liuji Kamiji 16 Oct '20

16 Oct '20

Dear all, I have compiled NEST master@6997cae6c onFedora 32 with both, 1- gcc (10.2.1) and OpenMPI (4.0.4): the default on this distro 2 - Intel Parallel Studio XE update 2 with GSL compiled from source using the same compiler using same configuration (-Dwith-mpi=ON, -Dwith-boost=ON) . On Intel, -Dwith-gsl=${GSL_DIR} was added to point to the GSL built with the Intel Compiler. On the gcc configuration, all tests worked fine (I defined OMPI_MCA_rmaps_base_oversubscribe=1 to avoid oversubscription error as reported in issue #1758). On the other hand, on the Intel configuration, several MPI tests have failed as described in the attached files. (To allow oversubscription the following variables were defined: I_MPI_WAIT_MODE=1 and I_MPI_THREAD_YIELD=3) I report it here as it is probably not directly a NEST code issue, but hope that someone in the community could have the answer. If I should submit it as an issue on GitHub, please let me know. Attached files: cmake_command_summary.txt : cmake command invocation and summary installcheck.log : make installcheck log reports.tar.gz : reports folder created by make installcheck; it also contains the instalcheck.log file above Best, Nilton -- Nilton Liuji Kamiji University of Sao Paulo Department of Physics, FFCLRP Laboratory of Neural Systems Phone: +55 16 3315 3859

2 2

Running NEST with SIONlib
by Itaru Kitayama 14 Oct '20

14 Oct '20

Hi, Has anyone explored the external library support? I am on Fugaku and the jobs can create casually tens of thousands of files in a single directory; this aborts jobs. Itaru.

2 5

Open NEST Developer Video Conference Monday 12 October 2020 11:30 CEST (UTC+2)
by Dennis Terhorst 12 Oct '20

12 Oct '20

Dear NEST Users & Developers! I would like to invite you to our next fortnightly Open NEST Developer Video Conference today Monday 12 October, 11.30-12.30 CEST (UTC+2). In the Project team round, a contact person of each team will give a short statement summarizing ongoing work in the team and cross-cutting points that need discussion among the teams. The remainder of the meeting we would go into a more in-depth discussion of topics that came up on the mailing list or that are suggested by the teams. Agenda Welcome Review of NEST User Mailing List Project team round In-depth discussion * HBP CodeJam #11 <https://www.humanbrainproject.eu/en/education/participatecollaborate/infras…> * Extension Module System <https://github.com/nest/nest-simulator/projects/22> * Issue #1773 <https://github.com/nest/nest-simulator/issues/1773>: wrapper around |Prepare| and |Run| The agenda for this meeting is also available online, see https://github.com/nest/nest-simulator/wiki/2020-10-12-Open-NEST-Developer-… Looking forward to seeing you soon! best, Dennis Terhorst ------------------ Log-in information ------------------ We use a virtual conference room provided by DFN (Deutsches Forschungsnetz). You can use the web client to connect. We however encourage everyone to use a headset for better audio quality or even a proper video conferencing system (see below) or software when available. Web client * Visit https://conf.dfn.de/webapp/conference/97938800 * Enter your name and allow your browser to use camera and microphone * The conference does not need a PIN to join, just click join and you're in. In case you see a dfnconf logo and the phrase "Auf den Meetingveranstalter warten", just be patient, the meeting host needs to join first (a voice will tell you). VC system/software How to log in with a video conferencing system, depends on you VC system or software. - Using the H.323 protocol (eg Polycom): vc.dfn.net##97938800 or 194.95.240.2##97938800 - Using the SIP protocol:97938800@vc.dfn.de - By telephone: +49-30-200-97938800 For those who do not have a video conference system or suitable software, Polycom provides a pretty good free app for iOS and Android, so you can join from your tablet (Polycom RealPresence Mobile, available from AppStore/PlayStore). Note that firewalls may interfere with videoconferencing in various and sometimes confusing ways. For more technical information on logging in from various VC systems, please see http://vcc.zih.tu-dresden.de/index.php?linkid=1.1.3.4

1 0

2025

2024

2023

2022

2021

2020

2019

NEST Users October 2020