- NEST Users - NEST Initiative Mail

Restructured documentation build system: please update open PRs!
by Hans Ekkehard Plesser 01 Mar '21

01 Mar '21

Dear NEST Developers! With the merge of #1843 a few moments ago, we have implemented a significant change in the way NEST documentation is built (thank you, Jochen!). Please merge the current master in all open PRs to avoid complications. With the new setup, documentation can be built with `make doc` and will be built in the build directory and can also be installed. To build the documentation, you will need a range of Python packages. Please see doc/requirements.txt for what is needed. We will continue to make improvements to the documentation build system, but these will be minor. If you have any open PRs, please merge the current master as soon as possible into your branches. Best regards, Hans Ekkehard -- Prof. Dr. Hans Ekkehard Plesser Head, Department of Data Science Faculty of Science and Technology Norwegian University of Life Sciences PO Box 5003, 1432 Aas, Norway Phone +47 6723 1560 Email hans.ekkehard.plesser(a)nmbu.no<mailto:hans.ekkehard.plesser@nmbu.no> Home http://arken.nmbu.no/~plesser

1 0

Open NEST Developer Video Conference Monday 1 March 2021 11:30 CET (UTC+1)
by Dennis Terhorst 01 Mar '21

01 Mar '21

Dear NEST Users & Developers! I would like to invite you to our next fortnightly Open NEST Developer Video Conference, today Monday 1 March, 11.30-12.30 CET (UTC+1). As usual, in the Project team round, a contact person of each team will give a short statement summarizing ongoing work in the team and cross-cutting points that need discussion among the teams. The remainder of the meeting we would go into a more in-depth discussion of topics that came up on the mailing list or that are suggested by the teams. Today this would for example be a discussion about changing the minimum required Python version. Agenda Welcome Review of NEST User Mailing List Project team round In-depth discussion Raise minimal Python version required: hike to 3.7 or 3.8 (see #1932 <https://github.com/nest/nest-simulator/pull/1932#issuecomment-782710952>)? The agenda for this meeting is also available online, see https://github.com/nest/nest-simulator/wiki/2021-03-01-Open-NEST-Developer-… Looking forward to seeing you soon! best, Dennis Terhorst ------------------ Log-in information ------------------ We use a virtual conference room provided by DFN (Deutsches Forschungsnetz). You can use the web client to connect. We however encourage everyone to use a headset for better audio quality or even a proper video conferencing system (see below) or software when available. Web client * Visit https://conf.dfn.de/webapp/conference/97938800 * Enter your name and allow your browser to use camera and microphone * The conference does not need a PIN to join, just click join and you're in. In case you see a dfnconf logo and the phrase "Auf den Meetingveranstalter warten", just be patient, the meeting host needs to join first (a voice will tell you). VC system/software How to log in with a video conferencing system, depends on you VC system or software. - Using the H.323 protocol (eg Polycom): vc.dfn.net##97938800 or 194.95.240.2##97938800 - Using the SIP protocol:97938800@vc.dfn.de - By telephone: +49-30-200-97938800 For those who do not have a video conference system or suitable software, Polycom provides a pretty good free app for iOS and Android, so you can join from your tablet (Polycom RealPresence Mobile, available from AppStore/PlayStore). Note that firewalls may interfere with videoconferencing in various and sometimes confusing ways. For more technical information on logging in from various VC systems, please see http://vcc.zih.tu-dresden.de/index.php?linkid=1.1.3.4

1 0

Error when plotting masks with azimuthal angle
by Arturo del Cerro Vergara 26 Feb '21

26 Feb '21

Hello, my name is Arturo and I think I found a bug when calling PlotTargets using the mask plot option with an azimuthal angle > 0. Below I give an example very easy to follow that shows that although the targets are plotted correctly, the mask is not. Correct me if I am doing anything wrong please. I attach an image of the results also. Thank you, Arturo. Code: l = topo.CreateLayer({'rows': 21, 'columns': 21, 'elements': 'iaf_psc_alpha'}) conndict = {'connection_type': 'divergent', 'mask': {'rectangular': {'lower_left': [-0.3, -0.12], 'upper_right': [-0.05, 0.12], 'azimuth_angle': 45.}}, 'kernel': 1.0} topo.ConnectLayers(l, l, conndict) fig = topo.PlotLayer(l, nodesize=40) ctr = topo.FindCenterElement(l) topo.PlotTargets(ctr, l, fig=fig, mask=conndict['mask'], src_size=250, tgt_color='red', tgt_size=20) [image: Captura.PNG]

2 1

NEST Developers / Github Checks: Please merge master into open PRs/branches
by Hans Ekkehard Plesser 25 Feb '21

25 Feb '21

Dear NEST Developers! Thanks to Lekshmi's great work, we can now use Github checks for continuous integration testing. Please merge master into your open PRs/branches to make sure your contributions run the Github checks. We will run Github checks and Travis checks in parallel for now. Best Hans Ekkehard -- Prof. Dr. Hans Ekkehard Plesser Head, Department of Data Science Faculty of Science and Technology Norwegian University of Life Sciences PO Box 5003, 1432 Aas, Norway Phone +47 6723 1560 Email hans.ekkehard.plesser(a)nmbu.no<mailto:hans.ekkehard.plesser@nmbu.no> Home http://arken.nmbu.no/~plesser

1 0

Help on models from the command line?
by Hans Ekkehard Plesser 24 Feb '21

24 Feb '21

Hi! Just a question, I may have ovelooked something. If I use NEST help to get information about a neuron model, I get the message that there is no help: In [28]: nest.help('iaf_psc_alpha') Sorry, there is no help for 'iaf_psc_alpha'. But we have all the nice model documentation. Have I overlooked something or do we need to upgrade help()? Best, Hans Ekkehard -- Prof. Dr. Hans Ekkehard Plesser Head, Department of Data Science Faculty of Science and Technology Norwegian University of Life Sciences PO Box 5003, 1432 Aas, Norway Phone +47 6723 1560 Email hans.ekkehard.plesser(a)nmbu.no<mailto:hans.ekkehard.plesser@nmbu.no> Home http://arken.nmbu.no/~plesser

2 1

Re: Nest on parallel computer
by Hans Ekkehard Plesser 20 Feb '21

20 Feb '21

Dear Johan, You do not tell us what the “result” number is that you print out. But I notice that the value you get when running with 10 MPI processes on PDC, is about 10 times smaller than the value you see with one process on your PC. I’ll venture a guess and assume you have a network of N neurons which you connect to one spike detector. You simulate, read out the number of spikes and convert it into a firing rate, dividing number of spikes by N * simtime. In an MPI-parallel simulation, the spike detector on each MPI process only gets the spikes of neurons simulated on that MPI process. If you still divide by the full number of neurons to compute the rate, one would expect exactly the behavior you observe. In the future, please provide more details about what you are doing, so we can provide more pointed advice. Best, Hans Ekkehard -- Prof. Dr. Hans Ekkehard Plesser Head, Department of Data Science Faculty of Science and Technology Norwegian University of Life Sciences PO Box 5003, 1432 Aas, Norway Phone +47 6723 1560 Email hans.ekkehard.plesser(a)nmbu.no<mailto:hans.ekkehard.plesser@nmbu.no> Home http://arken.nmbu.no/~plesser On 19/02/2021, 22:20, "JOHAN LILJEFORS" <JOHAN(a)liljefors.eu<mailto:JOHAN@liljefors.eu>> wrote: Dear Nest users, I am fairly new to Nest having used it only for a few months and it has been working without any problems on my PC running Linux. Recently I was given access to a PDC where I have been submitting jobs but I am encountering a problem with my model. I'm running Python 3.7.3 and Nest 2.18. On both my PC and on the PDC, I run the following python script: ------------------------------ import Nest For counter in range(0,10): nest.resetkernel() ___run___script print(result) ------------------------------ I execute this with "srun -n=1 python3 run.py" This outputs 10 numbers, ranging from 0.35-0.4. On the PDC, i run the same scripts but without the for loop: ------------------------------ import Nest nest.resetkernel() ___run___script print(result) ------------------------------ I execute this with "srun -n=10 python3 run.py" this outputs 10 numbers, but this time much smaller around 0.04. I am not doing any file operations, nor any MPI communication between the tasks and I am genuinely confused as to how submitting multiple tasks can yield a different result than a single task. Has anyone encountered anything similar? Regards Johan Liljefors

2 1

Nest on parallel computer
by JOHAN LILJEFORS 19 Feb '21

19 Feb '21

Dear Nest users, I am fairly new to Nest having used it only for a few months and it has been working without any problems on my PC running Linux. Recently I was given access to a PDC where I have been submitting jobs but I am encountering a problem with my model. I'm running Python 3.7.3 and Nest 2.18. On both my PC and on the PDC, I run the following python script: ------------------------------ import Nest For counter in range(0,10): nest.resetkernel() ___run___script print(result) ------------------------------ I execute this with "srun -n=1 python3 run.py" This outputs 10 numbers, ranging from 0.35-0.4. On the PDC, i run the same scripts but without the for loop: ------------------------------ import Nest nest.resetkernel() ___run___script print(result) ------------------------------ I execute this with "srun -n=10 python3 run.py" this outputs 10 numbers, but this time much smaller around 0.04. I am not doing any file operations, nor any MPI communication between the tasks and I am genuinely confused as to how submitting multiple tasks can yield a different result than a single task. Has anyone encountered anything similar? Regards Johan Liljefors

1 0

SAVE THE DATE for the virtual NEST Conference 2021
by Anne Elfgen 18 Feb '21

18 Feb '21

Dear Colleagues, The NEST Initiative is excited to invite everyone interested in Neural Simulation Technology and the NEST Simulator to the NEST Conference 2021! The NEST Conference provides an opportunity for the NEST Community to meet, exchange success stories, swap advice, learn about current developments in and around NEST spiking network simulation and its application. This year's conference willagaintake place as a *virtual conference*on Monday/Tuesday *28**/**29 June **2021*followed by a virtual NESTUserHackathon until Friday 2 July, whichoffers the opportunity to deep-dive your own code with expert developers at your fingertips. For more information please visit the conference website _*https://nest-simulator.org/conference*_ <https://nest-simulator.org/conference> We are looking forward to seeing you all in June! Hans EkkehardPlesser, Dennis Terhorst & Anne Elfgen

1 0

Nest compile on Piz-Daint
by Sergio Solinas 17 Feb '21

17 Feb '21

Dear NEST Users, I'm trying to get NEST up and running on Piz-Daint. I could manage to have it fully compiled and installed with python bindings, MPI, GSL and Boost. However, simulations start but get killed returning a std::bad_alloc. make installcheck also fails. Did anyone managed to have it installed on this HPC? Best regards, Sergio MG Solinas Dip. di Scienze Biomediche Università di Sassari Viale San Pietro 23 07100 - Sassari The NEURON School <https://www.neuronschool.org/> -- -- *Dona il 5x1000* all'Università degli Studi di Sassaricodice fiscale: 00196350904

2 1

neuron parameter as array?
by Cristiano Alessandro 16 Feb '21

16 Feb '21

Hi all, I am writing a new neuron model using nestml and then I modify the C++ code. I am having a hard time defining an input parameter of the neuron as an array of numbers. Is this even possible? Thanks. Regards Cristiano

3 2

2025

2024

2023

2022

2021

2020

2019

NEST Users